DataHUB Portable - Record/Reproduce/Publish/Subscribe
The 3rd generation DataHUB product line is a standards-based telemetry ground system with IRIG 106 Chapter 10 record, reproduce, publish & subscriber capability. The CPAS-6005 DataHUB is a 12VDC Portable system that provides (4) Bi-Directional TTL/422 channels, (4) Rx/Tx UART channels, & (1) SFP Ethernet channel. Optional data recording is provided using a removable CFast Solid State Drive.
The hallmark of Telspan products is multi-disciplined capabilities; the DataHUB provides gateway functions with IRIG 106 Chapter 7 encoding/decoding. With IRIG 106 Chapter 10 based publish/subscribe any/all incoming channels w/time can be transmitted over Ethernet networks and received for reproduce/record with another DataHUB.
The internal GPS receiver or PTP slave clock can seed the IRIG-A/B/G and NTP time generators. The core system is driven by a SoC, logic & Linux, not a Windows based host computing system. Setup of the DataHUB is accomplished via browser-based web GUI, CLI and/or through Telspan’s NetView Data Fusion software.
Coupling the DataHUB with optional NetView Data Fusion & Display software provides a complete telemetry data processing system.
Features
Diagram
Features & Specifications
DataHUB Inputs/Outputs
- 4 CH 50 Mbps PCM TTL/422
- Record/Reproduce
- 1 SFP Ethernet Channel
- Record/Publish/Subscribe
DataHUB Data Processing
- IRIG 106 Chapter 10
- Record/Reproduce/Publish/Subscribe
- IRIG 106 Chapter 7
- Encode/Decode
Multi-Disciplined
- GPS Receiver
- PTP/NTP & IRIG-A/B/G Timing
- Removable C-Fast Drive
- Web GUI/CLI/Discrete Controls
PCM Inputs/Output
4 Bi-Directional PCM (TTL/BNC & 422/Triax), 100Kbps to 50Mbps Per Channel
50 & 1000, Ohm Termination standard, 75 Ohm Available
NRZ-L/M/S, RNRZ-L
De-Randomize, Invert Data/Clock
Internal Loopback
PCM Simulator Per Channel
Analog Inputs
DC to 100kHz
Serial Inputs
RS-232 Rx/Tx up to 3Mbps
GPS Receiver
NMEA 0183 & 1PPS (30nS) Output
IRIG / 1588 Timing
Time Inputs
IRIG-A/B/G Per Input (AM or DC)
IRIG 1PPS
IEEE-1588v2
NTP Client
Time Outputs
IRIG-A/B/G Time Code Generator AM & DC from IRIG/GPS/1588
IRIG 1PPS (from GPS)
CH7 Encoding/Decoding
1 RS-422 PCM Input, 2Mb to 20Mb and 1 RS-422 PCM Output, 2Mb to 20Mb
CH7 PCM Encoding/Decoding
Chapter 10 published stream
The standard PCM input/output format is IRIG 106-15 Chapter 7 Telemetry Downlink Standard from internal switch port Ethernet traffic. The switch port may contain an IRIG 106 Chapter 10 published stream, filtered or mirrored port switch traffic from a network.
Communication
10/100/1000BASE-T Command, Control & Monitoring Port
RS-232 IRIG 106 Chapter 10 Command & Control
User Configuration/Tools
CLI & Web GUI
Chapter 10 Record/Reproduce/Publish
High Stability RTC
± 1μ Second Time Tagging/Alignment
Throughput, Packed, Unpacked PCM
16 or 32 Bit PCM Alignments
Selectable Sync Strategy
Fully Independent Record & Reproduce
IRIG-A/B/G or GPS UTC Time Packets
Full Chapter 6 Dot Command Support
Remote Command/Control
Internal Storage
1 Removeable cFAST Drive
64GB Standard, Other Sizes Available
Mechanical
Portable 13.4” L x 6.5” W x 3.0” H
Less than 5 pounds
12VDC @ 1A
12VDC @ 1A
13.4” L x 6.5” W x 3” H
-40C to +75C
~ 5 Pounds
4 Bi-Directional
to 50Mbps/ Ch
TTL/BNC
422/Triax
Removable
cFAST Drive
(1) 10/100/1000
SFP Ports
Record/Publish/
Subscribe
GPS Receiver
IRIG A/B/G
1PPS, DC & AM
IEEE-1588v2
FPGA Processing
CH7 PCM
Encoder/Decoder
Web GUI
RS-232
CLI
Gallery
Downloads
DataHUB Portable Datasheet
Ground System Product Brief
Ruggedized Product Brief