MITR 5530 - Modular Instrumentation TAP Recorder
The CPAS-5530 Modular Instrumentation TAP Recorder (MITR) is a high-bandwidth, high-capacity IRIG 106 Chapter 10 data recorder/publisher with a modular TAP Interface Module (TIM) & Removable Memory Module (RMM). MITR is suitable for a wide range of data recording requirements in harsh & demanding environments.
The configurable TIM provides protocol independent full duplex 1-10G optical transceivers, MIL-STD-1553, video, audio & PCM channels. Logic driven protocols for optical channels include Ethernet, Fibre Channel, sFPDP, ARINC-818, & other communication transports. Rx input channels are recorded, published & also can be routed to any Tx output channel. MITR supports user configurable Framing & Signaling, Upper-Level Protocol, & Message/Sub-Message filtering of data. Also MIL-STD-1553 message/word level filtering. The filtered data can be published & or transmitted out the IRIG 106 Chapter 7/HDLC PCM outputs.
MITR supports the playback of recorded video or PCM in real-time to the video or PCM output channel which is controlled by the MIL-STD-1553, RS232/422 or Ethernet command and control interfaces.
The MRMM consists of up to 4 NVMe solid state drives in a single carrier supporting recording bandwidths up to 64Gbps (8GBps) & capacities up to 64TB. MRMM drives can also be used as Network Attached Storage (NAS) via multiple front panel Ethernet interfaces. User configurable channel groups can be directed to individual drives, multiple drives, & or Ethernet interfaces (publishing) outputs of TIM physical channels or filtered virtual channels. A modular bay allows use of the Government provided DRMM as an option.
FIPS 140-2 encryption/decryption is supported. Keys can be received via MIL-STD-1553, Ethernet, or RS232/422 command & control interfaces or via the RMM on insertion/power up (key is then erased from RMM).
MITR also contains a GPS receiver, IRIG Time Code Generator, & hardware based IEEE-1588v2 time engine. The external Ethernet interfaces can be used for IRIG 106 Chapter 10 data publishing, command/control, data download, NAS or as a Switch. Any/all external Ethernet interfaces can also be recorded.
Features
Diagram
Features & Specifications
RMM Removable Memory Module
- Over 64Gbps (8GBps) Sustained Record Rate
- NVMe SSD up to 64 TB
- Individually Addressable Drives for Multi-Layer Security Requirements
- CH10 STANAG/RAID/JBOD/NFS Configurations
- Built in 10G download port
TIM - TAP & Interface Module
- Channel Configuration
- 12 Optical, 8 PCM, 8 Video, 8 1553, 2 Audio
- Real-Time Data Filtering & Processing
- Frame, Upper Level Protocol, Message/Sub Message Filters
- Simultaneous Chapter 10 Publishing
MITR Management Bay
- Master Time Source
- Grand Master, Master, Slave & Transparent Capabilities
- GPS Receiver
- PTP 1588v2
- IRIG-A/B/G DC & AM, 1PPS
- 4 Gigabit Ethernet Interfaces
- Layer 2/3 Managed Switch
- PCM Encoder – HDLC/CH7
- MIL-STD-1553
- RS-232 & RS-422 Serial COM
- Discrete Inputs/Outputs IAW CH10
RMM - Removable Memory Module
NVMw SSD’s with up to 64TB capability
Individually Addressable Drives for Multi-Layer Security Requirements
CH10 STANAG/RAID/JBOD/NFS Configurations
Built in 10G Ethernet Download port
Configurable TIM
8 Optical
8 PCM
8 Video
8 1553
2 Analog
Layer 2/3 Managed Switch
Layer 2/3 Managed Switch
(4) 10/100/1000 Speed Ports (External)
1-4 PTP Ordinary/Transparent/Boundary Clocks
Port Mirroring & Link Aggregation (IEEE 802.3ad)
Up to 4K VLANS & 8K MAC Addresses
Jumbo Frame up to 9.6K
Packet Filtering Engine w/ up to 256 Entries
Flood Controllers (Broadcast/Multicast/Unicast)
Port Access Control Lists & Traffic Shaping
CH7 Encoding/Decoding
1 RS-422 PCM Input and output, 2Mb to 20Mb
CH7 PCM Encoding/Decoding
Chapter 10 published stream
The standard PCM input/output format is IRIG 106-15 Chapter 7 Telemetry Downlink Standard from internal switch port Ethernet traffic. The switch port may contain an IRIG 106 Chapter 10 published stream, filtered or mirrored port switch traffic from a network.
GPS Receiver
30ns RMS 15ns Compensated
Cold Start 26s, Hot Start 1s
IRIG Time
Time In
IRIG-A/B/G AM & DC
1PPS & GPS
IEEE-1588v2 (Slave Clock)
Time Out
IRIG-A/B/G AM & DC from IRIG/GPS/1588
1PPS (from GPS)
IEEE-1588v2 (Grand Master Clock) from IRIG/GPS
iEEE-1588
1-4 PTP Ordinary/Transparent/Boundary Clocks
Grand Master/Master/Slave
Discrete I/O
Discretes I/O IAW IRIG 106 Chapter 10
Reset & Event In, Data Errors Out
Ethernet Port Activity Out
User Configuration/Tools
CLI, Web GUI & SNMP Configure & Monitoring
Serial COM Ports
RS-232 & RS-422
Environmental/Mechanical
Dimensions
6.0”W x 8.97”L x 7.18”H
Weight
12.4lbs w/ RMM (varies w/ # of drives)
Power
MIL-STD-704A 28VDC Primary & Auxiliary, 2.8A Max
Environmental
MIL-STD-810F -40C to 70C, 70,000’, shock/vib w/gun fire, sand/dust, rain/humidity, explosive atmosphere/decompression
EMI/EMC
MIL-STD-461
28VDC
Primary/AUX
MIL-STD-704A
Width 6.25”
Length 8.83”
Height 7.68”
MIL-STD-810F
Shock/Vibe/Gun Fire
Sand/Rain/+ More
~ 14 Pounds
-40C to +70C
MIL-STD-810F
8GBps (64Gbps)
Sustained Recording
Rate
Up to 64TB
NVMe SSD
FIPS Encryption
12 Optical, 8 Video
8 PCM, 8 1553
2 Audio
GPS Receiver
IRIG A/B/G
1PPS, DC & AM
IEEE-1588v2
(4) 10/100/1000
Ethernet Ports
Layer 2/3 Management
CH 7 & HDLC
Encoding/Decoding
2 PCM Outputs
RS-232
RS-422
Discrete I/O IAW
IRIG 106 CH10
Reset/Event In
Data Errors Out
FPGA Based
Protocol Transforms
Gallery
Downloads
Datasheet
Ruggedized Product Brief
Ground System Product Brief