DataHUB Portable


The 3rd generation DataHUB product line is a standards-based telemetry ground system with IRIG 106 Chapter 10 record, reproduce, publish & subscriber capability. The CPAS-6005 DataHUB is a 12VDC Portable system that provides (4) Bi-Directional TTL/422 channels, (4) Rx/Tx UART channels, & (1) SFP Ethernet channel. Optional data recording is provided using a removable CFast Solid State Drive.

The hallmark of Telspan products is multi-disciplined capabilities; the DataHUB provides gateway functions with IRIG 106 Chapter 7 encoding/decoding. With IRIG 106 Chapter 10 based publish/subscribe any/all incoming channels w/time can be transmitted over Ethernet networks and received for reproduce/record with another DataHUB.

The internal GPS receiver or PTP slave clock can seed the IRIG-A/B/G and NTP time generators. The core system is driven by a SoC, logic & Linux, not a Windows based host computing system. Setup of the DataHUB is accomplished via browser-based web GUI, CLI and/or through Telspan’s NetView Data Fusion software.

Coupling the DataHUB with optional NetView Data Fusion & Display software provides a complete telemetry data processing system.

Features


● Record/Publish Channels: 4 Bi-Directional PCM
● Chapter 10 Recorder/Reproducer/Publisher/Subscriber
● Chapter 7 PCM Encoder/Decoder
● Removeable Data Recording
● GPS, IEEE-1588v2 PTP, NTP & IRIG-A/B/G TCG
● NetView Data Fusion adds Real-Time Displays

Diagram


Features & Specifications


  • 4 CH 50 Mbps PCM TTL/422
  • Record/Reproduce
  • 1 SFP Ethernet Channel
  • Record/Publish/Subscribe
  • IRIG 106 Chapter 10
  • Record/Reproduce/Publish/Subscribe
  • IRIG 106 Chapter 7
  • Encode/Decode
  • GPS Receiver
  • PTP/NTP & IRIG-A/B/G Timing
  • Removable C-Fast Drive
  • Web GUI/CLI/Discrete Controls
  • 4 Bi-Directional PCM (TTL/BNC & 422/Triax), 100Kbps to 50Mbps Per Channel
  • 50 & 1000, Ohm Termination standard, 75 Ohm Available
  • NRZ-L/M/S, RNRZ-L
  • De-Randomize, Invert Data/Clock
  • Internal Loopback
  • PCM Simulator Per Channel

DC to 100kHz

RS-232 Rx/Tx up to 3Mbps

NMEA 0183 & 1PPS (30nS) Output

  • Time Inputs
  • IRIG-A/B/G Per Input (AM or DC)
  • IRIG 1PPS
  • IEEE-1588v2
  • NTP Client
  • Time Outputs
  • IRIG-A/B/G Time Code Generator AM & DC from IRIG/GPS/1588
  • IRIG 1PPS (from GPS)

1 RS-422 PCM Input, 2Mb to 20Mb and 1 RS-422 PCM Output, 2Mb to 20Mb

  • CH7 PCM Encoding/Decoding
  • Chapter 10 published stream

The standard PCM input/output format is IRIG 106-15 Chapter 7 Telemetry Downlink Standard from internal switch port Ethernet traffic. The switch port may contain an IRIG 106 Chapter 10 published stream, filtered or mirrored port switch traffic from a network.

  • 10/100/1000BASE-T Command, Control & Monitoring Port
  • RS-232 IRIG 106 Chapter 10 Command & Control

CLI & Web GUI

  • High Stability RTC
  • ± 1μ Second Time Tagging/Alignment
  • Throughput, Packed, Unpacked PCM
  • 16 or 32 Bit PCM Alignments
  • Selectable Sync Strategy
  • Fully Independent Record & Reproduce
  • IRIG-A/B/G or GPS UTC Time Packets
  • Full Chapter 6 Dot Command Support
  • Remote Command/Control
  • 1 Removeable cFAST Drive
  • 64GB Standard, Other Sizes Available
  • Portable 13.4” L x 6.5” W x 3.0” H
  • Less than 5 pounds
  • 12VDC @ 1A

12VDC @ 1A

13.4” L x 6.5” W x 3” H

-40C to +75C

~ 5 Pounds

4 Bi-Directional to 50Mbps/ Ch TTL/BNC 422/Triax

Removable
cFAST Drive

(1) 10/100/1000 SFP Ports

Record/Publish/Subscribe

GPS Receiver

IRIG A/B/G
1PPS, DC & AM
IEEE-1588v2

FPGA Processing
CH7 PCM
Encoder/Decoder

Web GUI
RS-232
CLI

Gallery


Downloads